014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Industriële pneumatische oliepompen These pumps are advised for

These pumps are advised for the transfer of high viscosity oil (SAE 15/280)

The user can calibrate it according to the different units of measurement (litres

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

Deze set mag u gebruiken in de werkplaats zonder gebruik te hoeven maken van een lekbak

014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Industriële pneumatische oliepompen These pumps are advised forIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.