014-1065-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen 906-0142-020 Rubber slang 1/4" met

906-0142-020 Rubber slang 1/4" met 2 meter lengte

een volgplaat met doorsnede van 370 mm en een vul pistool

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

The follower plate is pushed down by the pressurised pneumatic cylinders

014-1065-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen 906-0142-020 Rubber slang 1/4" metIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.